2019年8月9日，CENELEC共發(fā)布了EN 60335-1:2012的三份修訂標準。采納了IEC 60335-1:2010的2013和2016年修訂版、增加部分的特殊要求，使之與IEC 60335-1:2010更好地銜接。此外，EN版本針對元器件的標準要求也進行了更新。
? 強制時間：制造商需在2021年7月30日前將產(chǎn)品符合標準的最新要求。
? EN 60335-1在用標準：EN 60335-1: 2012+A11: 2014+A13: 2017
? EN 60335-1升級后最新標準：
? EN 60335-1: 2012+A11: 2014+A13: 2017+A1: 2019+A14:2019+A2: 201
EN 60335-1升級最新標準的新增條款：（注：特別留意以下紅色加粗部分）
1. 標準：EN 60335-1:2012/A1:2019
（1）生效日期：2019年11月9日
強制日期：2021年7月30日
（對應于IEC 60335-1:2010/A1:2013）
該標準基于原EN 60335-1:2012+A11:2014+A13:2017進行更新
（2）相應變化
? 11.8 In Table 3 delete footnotes za, zb, zc, zd.
? 24.1: Components shall comply with the safety requirements specified in the relevant EN standards as far as they reasonably apply.
Plugs and socket-outlets and other connecting devices of interconnection cords shall not be interchangeable with plugs and socket-outlets listed in IEC/TR 60083 or IEC 60906-1 or with connectors and appliance inlets complying with the standard sheets of EN 60320-1, if direct supply to these parts from the supply mains could give rise to a hazard. When an EN standard does not exist for a component, there are no additional tests specified.
2. 標準：EN 60335-1:2012/A14:2019
（1）生效日期：2019年11月9日
強制日期：2021年7月30日
該標準基于原EN 60335-1:2012+A11:2014+A13:2017+A1:2019進行更新
（2）相應變化：
? 7.10: Add the text after the first paragraph of the addition（see standard）.
? 8.1.1: Replace the first sentence of the replacement of the 3rd；
? 8.1.3: Add the text “, test probe 18” after “test probe B,”.
? 20.2: In the second paragraph replace the word “movable” by “moving” and replace “main function” by “working function”.
? 22.12: Other parts that are intended to be detached during use, maintenance or cleaning (examples are batteries, battery covers, lids, attachments, steam nozzles) are not considered as parts providing a similar function as handles, knobs, grips, levers.
? 22.17: This is not applicable to built-in appliances.
? 24.1: NOTE Z3 For details of plugs used in CENELEC countries listed in IEC TR 60083 see Annex ZH.
? 25.1: Plugs and pins for insertion into socket outlets shall follow the relevant standards sheets in Annex ZH.
? 25.6: Delete the addition.
? 25.25: Dimensions of the pins and engagement face of plugs of appliances that are inserted into socket-outlets are to be in accordance with the dimensions of the relevant plug standard. NOTE Z1 Common plugs and socket-outlets types in CENELEC countries as shown in Annex ZH.
? 32: Delete in the third paragraph “EN 50366 or”.
3. 標準：EN 60335-1:2012/A2:2019
（1）生效日期：2019年11月9日
強制日期：2021年7月30日
（對應于IEC 60335-1:2010/A2:2016）
基于原EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019進行更新
（2）相應變化
? 7.10: Delete the paragraphs starting with “Devices used to start/stop….” until the end of the requirement “……by vulnerable persons.”. This includes Notes Z1 and Z2.
? 7.12: Delete the sub clause.
? 7.14: Delete Note Z1.
? 22.12: Delete Note Z1.
? 24: Type S2 and S3 capacitors according to EN 60252-1 are not required to undergo the testing as required by 30.2.2 and 30.2.3.1.
? 25.7: Delete the existing text starting “Halogen free thermoplastic……..” until ”……..designation H07ZZ-F). “.
